• Welcome to Hangzhou Roll Forming Machinery Co., Ltd
  • With more than 20 years experience of research and development
HANGZHOU ROLL FORMING MACHINERY CO., LTD
Products   -   Roof/Wall Panel Roll Forming Machine   -   Double Layer Forming Machine
This double layer forming machine is a a new type of energy-saving and high-effective producing equipment for steel structure.

Components List
Name Model/Name Quantity Technical Description
1.Decoiler system Cantilever type automatic decoiler 1set Cantilever, hydraulic expanding, electrical motor actively release the sheet and ultrasonic control.
2.Main forming system Guiding device 1set 1. Roller material:No.45 steel with surface hard chrome painted. 2. Roller inner supporting structure type: guide column 3. Planetary gear speed reducer motor driving, the back/forward rollers driven by chain, part of upper/lower rollers driven by gear 4.Cutting blade material Cr12 quenched treatment
Roll forming system 2set
Post-cutting device 1set
3.Output system Supporting Table 1sets For supporting the finished panel.
4. Hydraulic system 1set Hydraulic station
5. Electric control system 1set PLC Control, encoder automatic cutting in length Operation stage: button AC frequency for adjusting the speed

Technical Specification
Item Para Remark
Suitable material Type Colored coating steel

Thickness (mm) 0.4-0.7

Yield Strength (Mpa) 230-300Mpa

Width (mm) 1200mm

Wt of the Coil (t) 8T

OD Φ1350mm

ID Φ508 mm/Φ610mm
Material of rollers No45 chromeplate
Forming Speed (m/min) 20 Not including cutting time
Power Source AC380V ,50Hz, 3 Phase according to actual design
Total power(kw) About26 according to actual design
Dimension (L×W×H, m) See the layout according to actual design

Working Flow
Decoiling→Guiding device→Roll forming→Post Cutting→Product supporter

Profile drawing

 double layer forming machine

More Projects

Hangzhou Roll Forming Machinery Co., Ltd About Us